In order to ensure the correct use of grinding wheels in normal work, our products, labels and packaging are illustrated with icons below. Before using, you should read the operation guide carefully in order to use it correctly.
1. Careful handling, proper storage, cutting pieces stacking requires flat ground, the best use of steel plate as the floor.
2. The grinding wheel may be damaged during transportation. When installing the grinding wheel sheet, it is necessary to carefully check whether it is in good condition.
3. Safety protection devices should be provided to ensure the correct and firm installation position. Protective devices should cover half of the grinding wheel discs. In case grinding wheel bursts can protect the operator, non-reinforced cutting grinding wheel discs can only be used for fixed machines, and protective measures should be taken.
4. When replacing the grinding wheel sheet, cut off the power supply to grab the socket and pull out the plug.
5. It ensures that the machine's runaway degree does not exceed the maximum 6. speed indicated by the grinding wheel.
6. Install grinding wheel flanges correctly and make sure they are in good condition, clean and burr-free.
7. Before cutting or grinding, under the condition of safety measures, the newly installed grinding wheel sheet will be operated at working speed to check whether the quality of the grinding wheel is in good condition.
8. Always wear an eye shield when operating.
9. Always wear appropriate work clothes, such as dust masks, gloves, ear protectors, overalls and safety shoes.
10. Check the running speed of the machine regularly, especially the speed control device installed on the machine. Maintenance or maintenance should be carried out
11. Do ensure that the machine keeps normal at all times.
12. Do check the tension of the driving belt, the belt must be tensioned to prevent the belt from slipping, so as to ensure full power transmission.
13. When grinding or cutting a workpiece, it is necessary to ensure that the workpiece is firmly fixed and the use of grinding discs is prohibited for cutting small grinding wheels.
14. When not cutting, put the cutter in a safe place so as not to touch the ring grinding wheel.
15. When in cutting, the cutting machine should be placed in a suitable place, the working place should be very flat and the machine should be fixed.
16. When in grinding, the grinding wheel is pressed at an angle of 30 degrees with the working face.
17. Keep the cutting and grinding workspace clean and prevent slipping during cutting.
